Tuesday, July 7, 2009

1 Dual boot Linux and Windows XP (Linux installed first)

Introduction:
Installing Windows on the PC alongside your existing LINUX installation on the same physical Hard Drive which already has UBUNTU 8.04 installed.


Summary:

We'll create space on the LINUX Partition to install Windows XP. XP bootloader is fairly clumsy when it comes to dualbooting and will overwrite GRUB completely. We'll re-install GRUB to the MBR and configure it to dualboot both UBUNTU and XP.


Backup the GRUB Boot Menu:

Regardless to which bootloader you end up using, it's a very good move to first backup the GRUB bootloader. It's easy to loose it and unless you know how to re-write it from the stratch then you're generally facing a full re-installation of UBUNTU.




Firstly, boot into UBUNTU and go to Applications > Accessories > Terminal. Then type in the following:

sudo gedit /boot/grub/menu.list

This text file contains all the information GRUB uses to configure various boot options. Scroll down to the entries between "###End Default Options##" and "###END DEBIAN AUTOMATIC KERNELS LIST" are the LINUX boot options.

Make a backup of the files by going to File, Save As and selecting a different location. Or take a full copy of the contents and place it into a new text file. If you can, create the backup on a removable disk or networked location.


Make space for XP:

Now we need to create space on the Hard Drive for XP, so this will involve re-sizing the main UBUNTU partition. Restart the system using the live UBUNTU CD as this gives you access to GNOME Partition Editor. When the CD loads, select "Try UBUNTU without any change to your computer".




Once the CD loads go to System > Administration > Partition Editor.




Right click on the main Data Partition which has been formatted with EXT3 - it should be

/dev/sda1
- and select Resize/Move




Move the slider from the right to shrink the ext3 partition and create free space on the Hard Drive, which will take the NTFS XP partition. Make sure that the free space is sufficient to hold XP (atleast 2GB - preferably 5GB). Then click Resize/Move to confirm the selection, and Apply back in the main screen to carry out the pending change.


Installing Windows XP:





Restart the system with the Windows XP CD and boot into install Program.
Unfortunately, so isn't so adaptive at handling existing partitions during the installation. It detects the two UBUNTU partitions and marks them C: and E: accordingly. The remaining unpartitioned space which is available for XP will be marked as F:

For the Operating System and the vast majority of Windows applications which have properly-coded installation scripts, this is not a problem. Some older applications will assume that C: is the system partition and may bring up errors. There are ways of changing the drive letter assignation of the system partition, but in this scenario it's strongly discouraged.




Now XP detects the LINUX partition as an Active system partition and won't install XP unless it marks this partition as Inactive.


Restore the GRUB Bootloader:

Once XP has been installed, it will boot happily into XP but there's no sign of UBUNTU. To re-instate GRUB as the system Bootloader it needs to be re-installed into the MBR.

Boot the system from the UBUNTU Live CD and select "Try UBUNTU without any change to your computer".




Open a Terminal session by going to Applications > Accessories > Terminal





To enter the GRUB configuration mode, type in sudo grub and press Enter key. Then type in the following commands in the sequence.


- root (hd0,0)
- setup (hd0)
- quit
- exit





Restart the system. You'll get the GRUB Bootloader but XP won't be an option. We need to add this to the boot options.

Boot into UBUNTU and open up the Terminal session. Then, type in the following:

sudo gedit /boot/grub/menu.lst

Scroll down to the bottom of the file and type in the following test strings:

title Windows XP
root (hd0,1)

makeactive
chainloader +1



Save the file and reboot the system. When the GRUB Loader launches hit ESC key at the boot menu. Windows XP is the last option. Select it and XP will load.

If you want to make the GRUB menu always available, boot back into UBUNTU and edit the MENU.LST file. Find the hiddenmenu text string and change it to #hiddenmenu

To increase the menu timeout, change the default timeout 3 to something more appropriate.


THAT'S ALL FOLKS....!!